18:08How to Install Outdoor Landscape Lighting | Ask This Old House
From the creator
In this video, master electrician, Heath Eastman demonstrates how to install landscape lighting along a garden path. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Adding landscape lighting to a walkway or path can improve the look and experience of the area. Once Heath figures out what kind of landscape lighting he wants, the location, and where the power source is located, he can then make the connections. Heath uses a low voltage wire and decides to replace the plastic connectors with brass connectors to make the connections last longer. He also installs a transformer so the homeowner can control when the lights power on and off. Time: 5 - 10 hours Cost: $5 - $200 per light Skill Level: Difficult Tools: Flat blade shovel [https://amzn.to/2XjXN6J] Wire stripper [https://amzn.to/38kPGNC] Allen key [https://amzn.to/3pO7XJ0] Level [https://amzn.to/3i0X18l] Shopping List: Landscape lights - pathway [http://bit.ly/3rXCuWC] / uplight [http://bit.ly/3ollwz7] Low voltage cable [https://amzn.to/3pWWjvy] Transformer - optional add-ons include photocell, timer, and built-in wifi component [http://bit.ly/2LmiFYd] Brass barrel connector [https://amzn.to/2LuCVqt] Step 1: Find your nearest power source This will be your starting point. Place lights in desired locations. Step 2: Run a low voltage cable Run a low voltage cable in the trench but do not bury. A low voltage cable is used as it is only 12v and if it accidentally gets cut, nobody will get hu
Published 2021-01-06 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





