01:54How to Install Cobblestone Driveway Edging | Ask This Old House
From the creator
In this video, This Old House mason Mark McCullough helps a homeowner keep her driveway from washing away by replacing an old, ineffective brick edging with big, bulky cobblestone. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Mason Mark McCullough helps a homeowner solve a draining issue—literally. Every time there is heavy rain, the homeowner’s driveway washes away. Mark shows her how to replace the existing brick border with cobblestone driveway edging to act as a retaining wall to add function and style. Difficulty: ⅖ Time: One weekend Cost: Around $25 per linear foot Where to find it? Mark works alongside a homeowner to raise the sinking driveway edging. Ideally the red brick edging acts as a barrier and helps to maintain the gravel driveway, but overtime grass or moss can grow over the edging, allowing water and gravity to pull the loose gravel over the edging. Mark starts with demoing the brick and prepping the trench using the following steps: 1. Starting at the top of the driveway, demo brick using a shovel. (Mark suggests starting from the top to allow gravity to help make the demo easier as you move down) 2. Dig out the trench 2-3 inches wider than the edging material (cobblestone 9”x5”) 3. Hand tamper the trench to level the dirt 4. Add 3-4 inches of gravel (depending on grade) 5. Mix concrete using a concrete pre-mix 6. Pour enough concrete to lay 5-6 stones and smooth out with a trowel (work in sections to incorporate the rebar)
Published 2022-10-16 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





