01:39How to Install Cable Lighting | All About Lights | Ask This Old House
From the creator
Ask This Old House master electrician Scott Caron replaces a track lighting setup with cable lighting in a new baby’s nursery. #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 3-4 hours Cost: $400 Skill Level: Moderate Tools List: Drill Driver Lineman’s Pliers Wire Strippers Shopping List: Cable Lighting Kit Cable Lighting Heads Toggle Bolts Wire Nuts Steps: 1. Before doing any electrical work, ensure that power is turned off at the circuit breaker. 2. Remove the existing light fixture by disconnecting the wiring connections and removing any supporting hardware. 3. Install the ceiling bracket provided with the cable light transformer to the existing electrical box. 4. Connect the ground wire from the electrical box to the ceiling bracket. 5. If needed, splice wire extensions to the existing conductors using wire nuts. 6. Feed the wire extensions down the center threaded rod of the ceiling bracket and through the center hole of the transformer. 7. Use the supplied nut to hold the transformer to the threaded rod. 8. Splice the wire extensions to the transformer wires using wire nuts. 9. Attach the transformer canopy using provided screws. 10. Measure and mark the locations for each standoff. Drill a pilot hole to confirm if there’s structure above. If there isn’t drill a hole large enough for a toggle bolt. About This Old House TV: This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information an
Published 2017-04-23 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





