01:39How to Install an Alternative to Gutters | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva installs an alternative to a gutter when a traditional one does not work. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2 hours Cost: $50 Skill Level: Beginner Tools List for Installing Gutter Alternatives: Ladder [https://amzn.to/2zxIWcW] Hammer [https://amzn.to/2NR7TIT] Prybar [https://amzn.to/2NFD9KB] Drill driver [https://amzn.to/2ZB9WCN] Measuring tape [https://amzn.to/2zyXmcI] Shopping List: Aluminum rain dispersal system [https://amzn.to/2NFqR4U] Steps: 1. Remove the old gutter by prying off the spikes with a hammer and a prybar. Then, unscrew the gutter from the fascia with the drill driver. 2. Mark 10” from the end of the house, then 30” from the end of the house, then 50” from the end. 3. Screw the mounting brackets on your marks as far down the fascia board as possible. It should be at least 4” down from the roof edge and 1 _” from the drip edge. 4. Clip the louvres on the rain dispersal system into the brackets. 5. Repeat the process as necessary to cover the whole side of the house. Resources: In most circumstances, traditional style gutters are the most effective at diverting water as far away from structures as possible, but they also require a downspout in order to redirect that water. In cases where large sections of roof require a gutter and there is no good place for a downspout, a rain dispersal system can be a viable option. Tom installed a white aluminum rain dispersal system,
Published 2018-05-09 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





