18:08How to Install a Wireless Thermostat | Ask This Old House
From the creator
This Old House plumbing and heating expert Richard Trethewey helps a homeowner install a wireless thermostat to control one zone of heating. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Richard installed the Wireless FocusPRO Comfort System Programmable Thermostat, manufactured by Honeywell [https://www.honeywellhome.com/us/en/]. Then, in the loft, Richard demonstrated the Total Control Comfort app, designed by Honeywell, which allows the thermostat to be controlled from any location using a compatible cell phone or tablet. Richard used the iOS version of the app for an iPad, which is available for download from iTunes [https://www.apple.com/itunes/]. Richard also showed a wireless receiver that can replace a wall-mounted thermostat, which is the WTR thermostat, manufactured by Zone First [https://www.zonefirst.com/]. Shopping List for Installing a Wireless Thermostat: - Wireless thermostat - Cable staples, used to secure the wiring - Hollow-wall anchors and screws, for mounting the thermostat Tools List for Installing a Wireless Thermostat: - Cordless drill - Hammer, for installing cable staples - Wire stripper, used to strip insulation from wires Steps for Installing a Wireless Thermostat: 1. Mount the electronic interface module (receiver) to the wall beside the boiler. 2. Run two wires from the receiver to the appropriate zone valve. 3. Run two more wires from the receiver to a transformer. Fas
Published 2015-12-03 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





