18:08How to Install a Whole-House Water Filter | Ask This Old House
From the creator
Ask This Old House plumbing and heating expert Richard Trethewey improves the taste and odor of municipal drinking water with a whole house filtration system that includes a sediment filter and a granulated activated carbon filter. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2-3 hours Cost: $1,000 Skill Level: Moderate Tools List: Tubing Cutter Fitting Brush/Pipe Cleaner Torch Shopping List: Whole House Filtration System Copper Pipe and Fittings 3 Copper Ball Valves Adapter Fittings to Connect Filters Flux Solder Thread Sealing Tape Steps: 1. Turn off the main plumbing supply to the house and drain as much water as possible from the pipes by opening all faucets and fixtures and then opening a drawoff valve near the main. 2. Determine the location of the prefilter. If necessary, attach a piece of plywood for attaching the filter bracket. 3. Use a tubing cutter to cut in to the main water supply pipe. 4. Clean, apply flux, and solder the adapter fittings to transition into the filter housing on a workbench to keep the heat away from the filter. Once cool, connect the adapter fittings to the filter housing, using thread sealing tape on threaded connections. 5. Clean, flux, and then dryfit the remaining connections. Include “T” fittings that allow water into and out of the filter, but also connect to a shutoff valve that serves as a bypass. Include a shutoff valve for water entering the filter and a shutoff valve for water leaving the filter.
Published 2017-04-30 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





