tubeshowcase●1,673,858 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts04:31

How to Install a Water Saving Toilet | Ask This Old House

This Old House ↗

From the creator

Ask This Old House plumbing and heating expert Richard Trethewey replaces an old toilet with a "Water Sense" solution. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2 hours Cost: $250 Skill Level: Moderate Tools List for Installing a Water Saving Toilet: Open ended adjustable wrench Putty knife Mini hacksaw Shopping List: Dual-flush toilet Bucket Sponge Gloves Closet bolts, closet nuts, and closet washers Wax ring Toilet caps Caulking Steps: 1. Shut the water off at the toilet. The shut off valve should be to the left of the toilet. 2. Flush the toilet to drain out as much water as possible. The rest can be removed with a sponge and a bucket. 3. Break the water connection from the hose to the toilet tank. It usually can be loosened with hands alone. 4. Use the open ended adjustable wrench to loosen the closet bolts on both sides of the toilet. Remove the nut and the washer. 5. Use the grips under the toilet to carefully lift the toilet straight up off the bolts. 6. Wearing gloves, remove the wax around the flange using a putty knife. 7. Check to ensure the closet flange is intact. Replace if it is broken. 8. Assemble the new toilet using brass tank bolts and the tank to bowl gasket, both of which should be included with the toilet. 9. Attach the new toilet seat to the bowl. 10. Insert new closet bolts into the flange. 11. Add a new wax ring to the flange. 12. Carefully put the new toilet back on the flange and push to set into the wax ring. 13.

Published 2018-03-23 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts