tubeshowcase●1,671,251 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts06:15

How to Install a Wall Mounted Space Heater | Ask This Old House

This Old House ↗

From the creator

Ask This Old House master electrician Scott Caron warms up a chilly bathroom by installing an electric convection heater. Watch the full episode: https://www.thisoldhouse.com/watch/ask-toh-primer-pipes-heat #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2 hours Cost: $150 Skill Level: Moderate Tools List: Screwdriver Lineman’s pliers Wire strippers Drill Shopping List: Electric wall-mount panel heater 14/2 non-metallic wiring Steps: 1. Determine a source of constant power nearby to the desired installation location of the heater. 2. Before doing any electrical work, ensure power is turned off at the breaker panel for the active circuits and confirm it’s off with a tester. 3. If using an existing outlet as a power source, remove the cover plate with a screwdriver, then remove the outlet from the box. It may also be necessary to remove the box from the wall. 4. Run 14/2 wiring from the existing outlet to the location of the new heater. It may be necessary to drill through wall studs or other structure. 5. Remove the sheathing on the new wire at the existing outlet, then feed that wire through the electrical box. 6. Strip the conductors on the new wire and either connect them to an available screw on the outlet or splice to existing conductors using wire nuts. 7. Resecure the electrical box in the wall, replace the outlet, and install the cover plate. 8. Strip the other end of the new wire and splice the conductors from the po

Published 2017-05-14 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts