How to Install a Trash Pull Out | Ask This Old House

From the creator

In this video, A garbage can in the middle of the kitchen isn’t ideal, but hiding those trash and recycling cans away in a cabinet might be. When a homeowner needed a new trash pull out install, carpenter Nathan Gilbert knew just what to do. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Where to find it? Trash insert kit installed was a Rev-A-Shelf double 35-quart pullout containers with a soft-close [https://homedepot.sjv.io/19b2Xa]. The kit came with hardware, bins, and a template to help mount the frame. To assemble the kit Nathan used a rubber mallet [https://homedepot.sjv.io/nLVg7a] and a screwdriver [https://homedepot.sjv.io/zxjR1e]. To install he used the template that came with the kit, using a tape measure [https://homedepot.sjv.io/rQEBXy] and pencil [https://homedepot.sjv.io/DKWJ3o] to find a good placement for the frame. Nathan pre-drilled [https://homedepot.sjv.io/anv2bZ] the screw locations using a drill with a 3/32” bit, then installed the frame with the screws provided. To mount the door, Nathan added double-sided tape [https://homedepot.sjv.io/zNZrQO] to hold it in place while he found the correct placement of the door and screwed in the brackets. Nathan polished the wood cabinet with a scratch remover [https://homedepot.sjv.io/2aK2ng]. Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH Plus, download our F

Published 2025-01-12 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.