tubeshowcase●1,671,868 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts04:00

How to Install a Towel Warmer | This Old House

This Old House ↗

From the creator

This Old House plumbing and heating contractor Richard Trethewey installs a combination towel warmer/radiator. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse This Old House plumbing and heating contractor Richard Trethewey explains how to install a towel warmer. Time: 4 to 6 hours Difficulty: Moderate to Hard. Requires advanced plumbing skills Shopping List for How to Install a Towel Warmer: - hydronic towel warmer - chrome nipples with shut-off valves - _-inch copper pipe and assorted fittings - lead-free solder - flux - emery cloth - flame-resistant cloth, used to protect surfaces from propane torch flame - toggle bolts or screws, used for attaching hanger bases to wall - drywall screws, used to reattach plywood subfloor Tools for How to Install a Towel Warmer: - reciprocating saw, used to cut pipes and saw through plywood subfloor - drill/driver - adjustable wrench Adjustable wrench - hammer drill, used to bore through tiled wall - propane torch, used for soldering copper pipe - screwdriver - pliers Steps: 1. Drain hot-water heating system; turn off water supply to the old radiator. 2. Use reciprocating saw to cut hot-water supply and return lines from old radiator; remove radiator. 3. Cut open floor for relocating new hot-water supply and return lines. 4. Hold towel warmer against wall and mark its location. 5. Cut and dry-assemble copper pipe and fittings to extend the hot-water supply and return l

Published 2013-08-27 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts