02:33How to Install a Timed Washing-Machine Valve | Ask This Old House
From the creator
This Old House plumbing and heating expert Richard Trethewey installs a new washing-machine valve that will prevent flooding. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Shopping List for Installing a Timed Washing-Machine Valve: - Timed washing-machine valve - Brass elbows, to join the valve to the water-supply pipes - Copper pipe and assorted fittings - Lead-free solder - Acid brush and flux, to apply to pipe and fittings prior to soldering - Braided stainless-steel hoses, to connect the washing machine to the valve - Copper pipe clips, to fasten the pipes to the wall - 3/4-inch screws, to secure copper pipe clips Tools List for Installing a Timed Washing-Machine Valve: - Propane torch - Tubing cutter, to cut copper pipe - Cleaning brush, to clean copper pipe and fittings - Adjustable wrench, to tighten compression fittings - Pliers, to tighten washing-machine hoses - Cordless drill Steps for Installing a Timed Washing-Machine Valve: 1. Close the hot- and cold-water shutoff valves leading to the washing machine. 2. Disconnect the hoses from the back of the machine and slide the machine out of the way. 3. Tighten two brass 90-degree elbows onto the rear of the timed washing-machine valve. 4. Use the close-quartertubing cutter to cut into the existing hot- and cold-water supply pipes. 5. Clean the new copper pipe and fittings with the cleaning brush. 6. Use the acid brush to apply flux to the pipe ends and fittings. 7. Solder the new copper pipe and fi
Published 2015-12-21 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





