13:51How to Install a Self-Watering Garden | Ask This Old House
From the creator
Ask This Old House landscape contractor Roger Cook shows a homeowner in Orlando how to plant a low-maintenance vegetable garden using hydroponics. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 5 hours Cost: $700 Skill Level: Moderate Tools List for Installing a Self-Watering Garden: Rubber Mallet Torpedo Level Irrigation punch tool Shopping List: Hydroponic garden kit Weed barrier Landscape staples Perlite Coconut Fiber 32 gallon trash can Plug in timer Steps: 1. Vegetables thrive in full sunlight, so choose a sunny location. 2. Lay down a layer of weed barrier with landscape staples. 3. Drive support rods into the ground one foot using the rubber mallet. Ensure they stay plumb with the torpedo level. 4. Drive the support column into the ground over the support rods, sinking it 10” into the ground. Use a bolt to ensure the end of the column isn’t damaged. 5. Slide the lower planter over the support column. Add two spacers, then the support for the next planter. 6. Add the column extension to reach the final height of the system. 7. Before planting in the upper planters, use a scrap piece of pipe to cover the holes. 8. Fill the container _ with perlite and _ with coconut fiber. 9. Add plants to the corners of the planters, covering with coconut fiber. 10. Fill the lower planter with the same mix and plant with larger crops like broccoli. 11. Drop each square planter onto the column, keeping each level at opposing angles. 12. Add a
Published 2018-06-24 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





