tubeshowcase●1,670,700 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts08:19

How to Install a Rustic Stone Walkway | Ask This Old House

This Old House ↗

From the creator

Ask This Old House mason Mark McCullough installs a front walkway for a homeowner using natural stone. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 5-6 hours Cost: $2000 Skill Level: Moderate to Expert Tools: Safety glasses Hearing protection Shovel Pickaxe Wheelbarrow Compactor Trowel Rubber mallet Level Masonry hammer Shopping List: Natural stone steppers Spray paint Stone pack material (crushed stone and stone dust) Stone dust Plastic edging Steps: 1. Before doing any project that requires digging, always contact your utility locating service to identify the location of water lines, gas lines, etc. 2. Use spray paint or some other type of marker to determine where the path will go to help make digging easier. 3. Use a pick axe to loosen the soil in between the lines of the new walkway. Then, use a shovel to dig out the path. Depending on the thickness of the stone, plan to dig down about 6-8”. For easy removal, dump the soil into a wheelbarrow. 4. Use a compactor to get the base as solid as possible. These can be rented at most home centers. A hand tamper would also work, but multiple steps in this process will require compacting, so it’s worth it to rent the compactor. Use hearing protection while running the compactor. 5. Once the walkway is packed down, add two inches or so of stone pack and compact that as well. 6. Add a couple more inches of stone pack on top of that and compact it. 7. Mix up the stone dust in the wheelbarrow with

Published 2018-10-22 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts