18:08How to Install a Rain Chain | Ask This Old House
From the creator
Ask This Old House landscape contractor Roger Cook installs a decorative and functional alternative to a downspout. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Cost: $75 Skill Level: Beginner Tools List: Shovel [https://amzn.to/32WEu3V] Masonry drill [https://amzn.to/3084USN] Shopping List: Rain Chain [https://amzn.to/2OcGp0c] Pot [https://amzn.to/2M5wFlE] 3/4 inch stone [https://amzn.to/31CvJvN] Decorative river stones [https://amzn.to/34OsiUK] Steps: 1. Decide where the rain chain will be hung and install a downspout outlet in the gutter in the desired location. 2. Dig a hole slightly wider than the width of your pot and at least 6” deep directly underneath the downspout outlet. 3. Fill the hole with the 3/4 inch stone. 4. Flip the pot upside down and drill a few drainage holes with a masonry drill. 5. Put the pot in place on top of the hole filled with stone. 6. Next, hang the rain chain. Most rain chains usually come with specific installation instructions. It should hook right into the downspout outlet. 7. Once the rain chain in hung, put the chain in the pot and fill the pot about three-quarters of the way with the 3/4 inch stone. 8. Fill the pot the rest of the way with the river stones. Use whatever is left over to cover the base underneath the pot as well. Resources: Roger installed a Circle Rain Chain, manufactured by Grasslands Road [https://amzn.to/2O6vBkm] (https://www.grasslandsroad.com/catalogs/grasslands_road/). They can be found at
Published 2018-02-05 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





