35:15How to Install a Pre-Hung Interior Door | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva shows a homeowner the proper way to install a pre-hung interior door for a closet. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Shopping List for How to Install a Pre-Hung Interior Door: - Pre-hung interior door [https://amzn.to/2LO9kbt] - Shims [https://amzn.to/2w6ypUm] Tools for How to Install a Pre-Hung Interior Door: - Level [https://amzn.to/2JMPAlV] - Nail gun [https://amzn.to/2HxNQds] or hammer [https://amzn.to/2HxNQds] - Measuring tape [https://amzn.to/2WNrHOV] - Circular saw [https://amzn.to/30r3foG] - Drill/driver [https://amzn.to/2VvOsp8] Steps for How to Install a Pre-Hung Interior Door: 1. Use a level to find a level spot on the rough opening. Mark spots on both sides of opening with a pencil. 2. Measure down to the floor on the hinge side using measuring tape, and note the measurement. 3. Measure down to the floor on the striker side, and note the measurement. 4. Hook the measuring tape on the bottom of the door on the hinge side, then measure and mark the height noted earlier. 5. Measure from your mark to the top of the header, then measure that same distance on the striker side to ensure the header will be level. 6. Hook the measuring tape under the striker-side jamb and measure up. The difference between the measurement from the rough opening to the mark on the doorjamb is the amount that will need to be cut out of the jamb (depending
Published 2016-02-15 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





