02:33How to Install a Pellet Stove | This Old House
From the creator
Adding a supplementary, efficient heat source with This Old House plumbing and heating expert Richard Trethewey and stove installer Rob Dardano. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Richard and an expert helped a homeowner who wanted a new pellet-burning stove as a source of supplemental heat in her living room. The stove itself has a “hopper,” where wood pellet fuel is loaded. An electric auger then automatically feeds the pellets into the belly of the stove, where they're burned for heat. The stove is controlled by a thermostat, and the pellets are made from recycled wood products. The stove was installed in a corner of the living room; a heat-resistant pad was placed on the wood floor to protect it. To install the exhaust pipe for the stove, the installer cut a hole in the wall, being careful not to cut through a stud. He then mounted plates on both the inside and outside of the wall to protect the wall from the heat of the exhaust pipe. Next, a separate smaller pipe was installed to bring fresh air into the stove for combustion. With both pipes installed through the wall, the final connections were made to the stove and the installation was complete. Shopping List for Installing a Pellet Stove: pellet stove [https://amzn.to/34EXOVg] fireproof floor pad [https://amzn.to/2ZXXceL] pellet vent pipe [https://amzn.to/34C12IZ] interior and exterior wall thimbles [https://amzn.to/30a0fMa] silicone caulk [ht
Published 2014-10-02 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





