How to Install a Patio Drainage System | Ask This Old House

From the creator

In this video, This Old House plumbing and heating expert Richard Trethewey helps a homeowner solve a cold spot in their home (the bathroom) radiant floor heating and an advanced heat exchanger. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. When a homeowner upgraded his old boiler to a new, combi system that worked with his heat pumps, he noticed he just could get his bathroom to warm up. With the idea to tap into his boiler’s water supply to install radiant floor heating in mind, the homeowner called the team at Ask This Old House for help, and Richard Trethewey answered. Where to find it? Richard mounts the heat exchanger [https://homedepot.sjv.io/XYeaBX] by securing it with screws [https://homedepot.sjv.io/vNaKdv]. Then, using a pipe cutter [https://homedepot.sjv.io/KjN65N], he cuts to allow room for a T-fitting [https://homedepot.sjv.io/LXNL6a]. Richard uses compression connections [https://homedepot.sjv.io/DKN6oy] and push-to-connect fittings [https://homedepot.sjv.io/GmNyWE] to run the piping from the T-fitting supply and return of the heat exchanger. Richard mounts the manifold by securing it to the plywood with screws. He then uses a pipe cutter to cut and connect the piping from the supply and return of the heat exchanger into the supply and return lines on the manifold. Richard mounts the radiant heat transfer plates [https://homedepot.sjv.io/NkqxLO] to the underside of the subfloor using screws. The homeowner snaps the PEX piping [https

Published 2024-04-21 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.