35:15How to Install a Natural Stone Patio with Fire Pit
From the creator
Watch the full episode: https://www.thisoldhouse.com/watch/ask-toh-water-filter-fire-pit Ask This Old House landscape designer Jenn Nawada installs a bluestone patio with a reclaimed granite fire pit. Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse Time: 1-2 days Cost: $5,000 and up Skill Level: Professional Tools List for Installing a Natural Stone Patio with Fire Pit: Excavator Gas Plate CompactorFeathers Wedges Mallet Push Broom Shopping List: Stone dust ¾” stone Thermal Bluestone Reclaimed Granite Steps: 1. Before digging, always call a utility locating service to locate underground pipes and wires. 2. Excavate the area for the patio down to subsoil by hand or using an excavator. 3. Rake out the subsoil to a smooth grade and then compact it with a gas plate compactor. 4. Fill the area with a base material that’s a mixture of ¾” stone and stone dust about 3” at a time. Rake out the mixture smooth and then compact it with the gas plate compactor. Repeat until the base material is about 3” below finished grade. 5. To cut the granite to length, drill a series of 3-4” deep holes on 3 sides of the stone. Insert feathers and wedges into every hole and then tap each one a little at a time with a mallet until the stone breaks. 6. Use the excavator to move the four granite stones for the fire pit into position. 7. Fill the center of the firepit about a third of the way with ¾” stone. 8
Published 2017-04-30 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





