tubeshowcase●1,674,522 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts08:02

How to Install a Fire Escape Ladder | Ask This Old House

This Old House ↗

From the creator

Ask This Old House general contractor Tom Silva helps a homeowner install an emergency escape ladder. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Shopping List for How to Install a Fire Escape Ladder: - Fire escape ladder - 2x4s,"] for blocking inside of wall - 3-inch screws, for screwing together the 2x4 blocking - 1/4-inch-diameter x 2 1/2-inch-long lag screws, to secure escape-ladder box - Foil-faced insulation, to insulate area around escape-ladder box - Spackling compound, to patch wall - Primer and paint Tools List for Installing a Fire Escape Ladder: - Level, to align template - Utility knife, for cutting through drywall - Reciprocating saw, to cut out wall stud - Hammer and chisel, for chopping out rough sill - Cordless impact driver, to drive screws - Cordless drill and 1/8-inch-diameter drill bit, for boring pilot holes - Ratcheting socket wrench, to tighten lag screws - Putty knife, for applying spackling compound Steps for How to Install a Fire Escape Ladder: 1. Take the template that comes with the fire escape ladder and tape it to the wall centered beneath the window and 6 inches below the window stool. 2. Use a level to ensure the top of the template is perfectly level. 3. Cut along the dotted lines on the template with a utility knife. 4. Remove the template and finish cutting through the drywall along the scored lines. 5. Pull out the severed piece of drywall and cut away any insulatio

Published 2016-07-08 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts