tubeshowcase●1,671,250 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts06:24

How to Install a Fence Gate | Ask This Old House

This Old House ↗

From the creator

Ask This Old House landscape contractor Roger Cook helps a homeowner install a new gate to fence in her pet dog. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Roger replaces a poorly built fence gate with one that will last. For a custom opening like this, a fence contractor could fabricate a custom gate to fit your opening. Time: 4 hours Cost: $200-300 Skill Level: Beginner Shopping List: Two 5”x5” pressure treated posts Two gate sections and hardware Fast-setting concrete Tools List for Installing a Fence Gate: Post hole digger Iron digging bar 4’ Level Wheelbarrow Shovel Scrap boards Drill/driver Steps: 1. Drive the post hole digger into the ground, separate the handles, and set aside any soil the digger collects. Do this until you have two holes each about 30” deep. 2. If objects like a brick or rock are encountered that the post hole digger can’t remove, an iron digging bar can help loosen the object. 3. When the hole is close to the desired depth, the round end of the digging bar can be used to compact the soil in the hole to its final level. 4. Use the level to ensure the post is plumb in both directions. 5. Fill the hole with a few inches of soil to hold the post plumb. Use the round end of the digging bar to compact that soil. 6. Mix the concrete in the wheelbarrow with a little bit of water. Ensure the water is spread evenly throughout the mix, but don’t let the mix get too wet. 7. Fill around the post evenly with concrete until the concrete

Published 2018-03-05 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts