tubeshowcase●1,673,666 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts07:40

How to Install a Ductless Heat Pump | Ask This Old House

This Old House ↗

From the creator

This Old House plumbing and heating expert Richard Trethewey and host Kevin O'Connor install a ductless heat pump to heat and cool a room. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Richard and Kevin installed a Mr. Slim ductless heat pump, model number MUZ-FE18NA, that provides 18,000 BTU/hour of cooling. It is manufactured by Mitsubishi Electric [https://www.mitsubishicomfort.com/]. Steps for How to Install a Ductless Heat Pump: 1. Calculate the heat and cooling load of the space, then order the appropriate size heat pump. 2. Mount the bracket for the indoor air handler to the room wall.[BR] 3. Use a hole saw to bore a 2 5/8-inch-diameter hole through the exterior wall. 4. Insert the plastic sleeve through the hole in the wall. 5. Attach plastic conduit to the outside of the house to conceal the refrigerant lines and electrical cable. 6. Attach the metal bracket to exterior of the house for mounting the condenser unit. 7. Run an electrical cable from outside through the wall and into the room. Connect the cable to the air handler. 8. Lift the air handler up to its mounting bracket, and feed the refrigerant lines and cable through the sleeve to the outdoors. 9. Hook the air handler onto its wall-mounted bracket and secure with screws. 10. From outside, connect copper tubing to the two refrigerant lines. 11. Run the refrigerant lines and electrical cable through the plastic conduit and down to the metal bracket installed in Step 6. 12. Snap the cover

Published 2016-03-16 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts