tubeshowcase●1,665,703 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts08:17

How to Install a Drip-Irrigation System | Ask This Old House

This Old House ↗

From the creator

Landscape contractor Roger Cook helps a homeowner install a water-saving drip-irrigation system. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Shopping List for How to Install a Drip-Irrigation System: - Drip-irrigation system, including tubing, fittings, connectors, and hardware - 1 1/2-inch-diameter PVC pipe, to install under the sidewalk[BR][BR] - Metal staples, to secure the tubing Tools List for How to Install a Drip-Irrigation System: - Flat-blade shovel, to scrape away gravel - Small sledgehammer, to tap in the staples - Utility knife, for cutting plastic tubing - End nippers, to pinch closed crimp connectors Steps for How to Install a Drip-Irrigation System: 1. Use flat-blade shovels to remove the gravel from the yard and form shallow trenches. Don't cut through the black plastic below. 2. Excavate trenches from the existing main water line across the yard and around every shrub and tree. 3. Connect an electric solenoid valve to each zone of the main water line. 4. Attach a pipe with backflow preventer to each solenoid. 5. Add another length of pipe and then install a pressure-reducing valve. 6. Open the valve to flush out dirt and debris from the main water line. 7. If necessary, dig below the sidewalk and push a length of 1 1/2-inch-diameter PVC pipe underneath the sidewalk. 8. Feed the main feeder line from the valves through the PVC pipe and along the trenches. 9. Hold the tubing in place wit

Published 2016-06-04 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts