01:39How to Install a Bluestone Landing on a Front Entry | This Old House
From the creator
This Old House landscape contractor Roger Cook upgrades an old brick landing on a front entry with bluestone slabs. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Roger helped a homeowner repair and improve an old set of front steps. The steps were made up of bricks and flagstone. Over time, some of the bricks and stones had popped loose, creating a safety hazard and an eyesore. To repair the steps and make them more attractive, Roger decided to remove the flagstone pieces and replace them with three large pieces of bluestone. First, they carefully removed the flagstone with a hammer and chisel. Once the stones were removed, Roger removed two old layers of mortar using an electric rotary hammer and chisel, exposing a concrete base underneath. Roger then mixed up new mortar in a wheelbarrow and applied a “bonding agent” to the bottom of the new bluestone. He then applied a new bed of mortar over the concrete base and laid the bluestone, bringing the top of it flush with the surrounding brick. Once the bluestone was in place, Roger mixed up another batch of mortar, which he packed into the joints. Finally, he replaced a few loose bricks and the installation was complete. Shopping List for Installing a Bluestone Landing on a Front Entry: thermal bluestone slabs mortar [https://amzn.to/3037kSL] bonding agent [https://amzn.to/30fWuIS] latex additive [https://amzn.to/2OawnNd] Tools List for Installing a Bluestone Land
Published 2014-08-15 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





