02:33How to Heat a Garage Workshop | Ask This Old House
From the creator
Ask This Old House plumbing and heating expert Richard Trethewey travels to Akron, Ohio to install a garage heater. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Richard installed the High Intensity Radiant Workshop Heater, manufactured by Mr. Heater [https://www.mrheater.com/]. Time: 3-4 hours Cost: $500 Skill Level: Expert Tools List for Heating a Garage Workshop: Drill driver Pipe cutters Shopping List: Radiant Workshop Heater Lag bolts Washers for bolts Spade bit Drywall screws Flexible gas line Gas pipe fittings Gas pipe in various sizes Pipe dope Vent Thermostat Steps: 1. Working with gas is extremely dangerous and should only be left to a licensed professional. 2. Shut the gas off at the meter. 3. Determine a location to mount the heater that’s easily accessible to the gas line. To give the heater more range, try mounting it in a corner. 4. Mount the bracket for the heater to the chosen location using bolts and a drill. Be sure to follow the instructions to ensure proper clearance from the walls and ceiling. 5. Slide the heater onto the mounting bracket and secure it with nuts that come with the heater. 6. Drill a hole into the wall or ceiling using the drill with a spade bit to connect the gas piping. 7. Screw the mounting bracket provided with the heater into the wall or ceiling using the drill and some drywall screws. 8. Connect the flexible gas line to the existing gas line and then pass it through the bracket. 9. Thread the fitting and br
Published 2018-10-28 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





