01:39How to Hang an Interior Door | This First House
From the creator
A professional interior carpenter, Mindy Otten-Chen helps a homeowner install a pre-hung door in his basement using proper techniques for a perfect fit. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. There are a lot of subtle tricks to hanging an interior door properly. If the jamb isn’t square, the door might not close, the door might spring open on its own, or it may even swing back closed when you don’t want it to. The keys are proper spacing and shimming to ensure everything is square, level, and plumb. You will need: Tape measure 6-foot level Speed square Jig saw Finish nailer Drill Oscillating tool Pry bar How to Hang an Interior Door 1. Start by checking the floor in the rough opening for level. If one side is higher than the other, you’ll need to trim the bottom of the door jamb to make up the difference. 2. Mark the bottom of the door jambs so they’re roughly ½-inch longer than the bottom of the door. If you found the floor to be out of level, you’ll need to make that measurement up here, marking one side shorter than the other without cutting a jamb so short that the door will scrape the floor. Scribe a line across the jamb with the speed square and cut it with the jig saw. 3. Check the hinge-side of the rough opening for plumb with the 6-foot level. Nail shims to the framing as needed to create a plumb surface for the door jamb. 4. Predrill holes in the jamb for screws above each of the hinges. Screws will allow you to adjust the frame as nee
Published 2026-07-10 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





