01:39How to Hang a Kitchen Wall Cabinet | Ask This Old House
From the creator
This Old House general contractor Tom Silva helps a homeowner purchase and install a kitchen wall cabinet. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Shopping List for Hanging a Kitchen Wall Cabinet: - Kitchen wall cabinet [https://amzn.to/2ZDMSDI] - 3-inch cabinet screws [https://amzn.to/2Prpf1l], used to fasten the cabinet to the wall Tools List for Hanging a Kitchen Wall Cabinet: - 4-foot level [https://amzn.to/2MMw630], used to check for plumb and level alignment - Stud finder [https://amzn.to/2Hygz2C] - Drill/driver [https://amzn.to/2ZB9WCN] - Tape measure [https://amzn.to/2zyXmcI] - Combination bit [https://amzn.to/2MLCQOI], used to bore pilot holes - Cabinet jack [https://amzn.to/2HzVwwG], used to support the cabinet Steps for Hanging a Kitchen Wall Cabinet: 1. Use a 4-foot level to see if the wall is plumb. 2. Mark the locations of the wall studs, then drill a small hole at each mark to confirm the stud locations. 3. Measure from a corner of the wall to the center of each stud, then transfer those dimensions to the back of the cabinet. Be sure to take into account the overhanging face frame. 4. Drill a pilot hole through the back of the cabinet at each stud location. 5. Reach inside the cabinet and hand-thread one 3-inch cabinet screw into each pilot hole. 6. Stand a cabinet jack in place below the cabinet location, then adjust the jack to the proper height. 7. Set the cabinet on top of the ja
Published 2016-01-23 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





