tubeshowcase●1,672,522 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts07:01

How to Hang a Heavy Mirror on Masonry | Ask This Old House

This Old House ↗

From the creator

Ask This Old House general contractor Tom Silva helps a homeowner hang a large mirror on the stone chimney above his fireplace. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2 hours Cost: $5 Skill Level: Moderate Tools List for Hanging a Heavy Mirror: Scaffolding Tape Measure Hammer Drill Screwdriver Shopping List: Concrete Anchors and Screws Steps: 1. Set up scaffolding (staging) in the work area. 2. Measure the center to center distance between the two hooks on the back of the mirror. 3. Measure from the bottom of the mirror to the top of the hook. 4. Measure the width of the chimney, then divide that in half to find the center location. 5. Determine the height of the bottom of the mirror off the mantle. From that point, measure up to the height of the hooks. 6. Using the center mark as a reference, divide the spacing between each hook in half, placing two marks on the stone equidistant from the center mark. 7. Determine the height from the mantle to the center height mark. Transfer that height to the two hook position marks. 8. Use a hammer drill to make a hole at your mark for the concrete anchors. Pump the trigger and be gentle when starting the hole. 9. Slide the concrete anchor into the hole and tap it in place with a hammer. 10. Use a hand screwdriver to set the screw into the anchor. 11. Lift the mirror and set it on the hooks. Resources: Staging and hammer drills can be rented from a home center or a tool rental shop. Concrete anc

Published 2018-06-18 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts