01:54How to Flatten a Textured Ceiling | Ask This Old House
From the creator
Ask This Old House painter Mauro Henrique smooths over a textured ceiling using joint compound. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 6-8 hours Cost: $200 Skill Level: Moderate Tools List for Flattening a Textured Ceiling: Safety glasses [https://amzn.to/2USGrKj] Ladder or staging [https://amzn.to/2Va9MoE] Buckets [https://amzn.to/2UTm8fM] Drill driver [https://amzn.to/2IRufYP] Mixing drill bit [https://amzn.to/2J40hjL] Taping knife [https://amzn.to/2ITdPiE] Hawk [https://amzn.to/2ITepgk] Shopping List: Joint compound [https://amzn.to/2VGRWZO] Plastic drop cloths [https://amzn.to/2ZPU6FG] Canvas drop cloths [https://amzn.to/2Le0Fic] Painter’s tape [https://amzn.to/2GMJ4IS] Rags [https://amzn.to/2IVcs35] 220 grit sandpaper [https://amzn.to/2PCMKAX] Steps: 1. Start by protecting the entire room with drop cloths. On the floor, use a canvas drop cloth. On the walls, use the plastic drop cloth. It isn’t necessary to cover the entire wall, just the top third. 2. Wipe down the ceiling with a damp rag to ensure it’s clean. 3. Mix the joint compound in a bucket using water and the drill with a mixing bit on it until it’s roughly thicker than a cake batter consistency. 4. Add some joint compound to the hawk. Scoop a small amount of the joint compound off the hawk using the taping knife, and then apply it in thin, smooth coats over the textured ceiling. This technique requires multiple coats, so don’t feel the need to fill in all the low spots
Published 2019-05-03 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





