tubeshowcase●1,673,095 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts05:13

How to Fix a Leaky Hose Spigot | Ask This Old House

This Old House ↗

From the creator

Ask This Old House plumbing and heating expert Richard Trethewey explains some of the common failure points in hose spigots and how to repair them #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 1 hour Cost: $5 and up Skill Level: Moderate Tools: Wrench [https://amzn.to/2zvVyo3] Philips head screwdriver [https://amzn.to/2W6lpun] Reseating tool [https://amzn.to/2SdRteY] Shopping List: Washer repair kit [https://amzn.to/2W85VpH] Teflon tape [https://amzn.to/2Sg45SJ] Steps for fixing a leaky hose spigot: 1. Richard explains that in most circumstances, a leaky hose spigot will leak from one of two places: the bonnet, or the spout. 2. If the leak is at the bonnet: a. Start by tightening the bonnet with a wrench. b. If that doesn’t work, shut the water off and fully remove the shutoff and the bonnet. Check the washer underneath the bonnet. If it is worn, replace it. There are washer replacement kits that can be bought at the home center, or even packing the threaded connection tightly with Teflon tape can do the trick. 3. If the leak is at the spout, the process is a little more involved: a. Turn the water off and remove the stem unit. b. Loosen the screw at the bottom of the stem unit with the screwdriver. It’s going to be hard to loosen, so it’s important to use the right size screwdriver and enough force to prevent it from stripping. c. Replace the washer of the stem unit and put the screw back in place. d. Take the re

Published 2020-05-04 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts