How to Do Electrical Projects with Two Tools | Ask This Old House

From the creator

Scott Caron, master electrician for Ask This Old House, explains how two tools are all it takes to do many electrical projects. #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Scott demonstrates uses for his favorite and most useful tools Lineman Pliers and a Cabinet-Tip Flathead Screwdriver. Both can be found at home centers or electrical supply shops. Expert assistance with this project was provided by Caron Electric [http://www.caronelectric.com/]. Tools for How to Do Electrical Projects with Two Tools: - Linesman pliers - Cabinet flathead screwdriver Steps for How to Do Electrical Projects with Two Tools: 1. Scott advises cutting wires using the linesman pliers. Just snip them. 2. Scott says you can cut off the insulation using the linesman pliers by placing the wire deep into the teeth and squeezing gently. Then pull and the insulation should break free without cutting the wires. 3. Scott favors the cabinet flathead screwdriver because switch plates all have slotted screws. And most electrical devices with Phillips screws also accommodate a flathead screwdriver. 4. Scott uses his linesman pliers to bang out the circular knockout heads from an electrical box. 5. To secure a locknut on the electrical box, Scott uses his cabinet flathead screwdriver and linesman pliers to knock it into place. 6. Scott uses his linesman pliers as a hammer to bang in staples to secure wiring to wallboard or to remove staples later. 7. To rem

Published 2016-05-23 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.