tubeshowcase●1,669,463 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts06:25

How to Cut Down a Dangerous Tree | Ask This Old House

This Old House ↗

From the creator

Ask This Old House landscape contractor Roger Cook cuts down a tree that’s leaning dangerously towards a house. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 4 hours Cost: $1,000 and up Skill Level: Expert Tools List for Cutting Down a Dangerous Tree: Bucket truck Chainsaw Hard hat Safety Glasses Gloves Ear protection Harness Chaps Wood chipper Shopping List: Rope Steps: 1. Removing a large tree with a dangerous lean is only recommended for a certified arborist with the correct tools and safety equipment. 2. Put on all safety gear and use a bucket truck to reach the highest point in the tree. 3. Use the chainsaw to cut off the smaller branches. 4. Put the smaller branches into a wood chipper. 5. Once the small branches are out of the way, wrap a rope around the tree, and then tie off sections of the large branches one at a time. Cut the large branches and use the rope to safely guide them towards the ground. 6. Once all the branches have been removed, cut the trunk in small sections and push them safely to the ground. Towards the top of the tree, the sections can be 3’-4’, but as you get closer to the ground, cut the sections about 16”-18”. 7. Once the tree has been cut down to a manageable size, tie the rope from the top of the tree to the base of something else in the direction the tree should fall. 8. Cut a wedge section out of about _ of the base of the tree in the direction the tree should fall. 9. Cut straight back into the tree from th

Published 2017-11-13 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts