13:51How to Create a Dutch Door | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva converts a regular door into a Dutch door. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 3 hours Cost: $100 Skill Level: Moderate Tools List for Creating a Dutch Door: Pencil [https://amzn.to/2kSd1Ah] Safety glasses [https://amzn.to/2mYd6mN] Chisel [https://amzn.to/2lfWpTn] Utility knife [https://amzn.to/2mWQ0gc] Drill [https://amzn.to/2mSflaY] Track saw [https://amzn.to/2lsdV6C] Palm sander [https://amzn.to/2lseU6O] Shopping List: Hinges (with screws) [https://amzn.to/2lg2kYA] Barrel latch [https://amzn.to/2loZQqH] Scrap cardboard [https://amzn.to/2mPsi5k] Scrap wood for Filler [https://amzn.to/2kRopw7] Wood glue [https://amzn.to/2lfBnUS] Wood screws [https://amzn.to/2kV9eCj] 80-100 grit sandpaper [https://amzn.to/2ls1wQ9] Steps: 1. With the door still hung in the jamb, mark where the cut for Dutch door will be. Use that as a guide to mark for 2 additional hinges above and below the cut mark. 2. Mortise the door where the new hinges will go with a chisel. Scoring around the mark with a utility knife can help prevent the door from chipping or cracking. 3. Once the hinges can fit flush against the door, attach the hinges to the door using a drill and screws. 4. With the new hinges attached to the door, trace where the hinges will attach to the jamb. Mortise the jamb and attach the other side of the hinges the same as earlier. 5. Replace the old hinges with new ones so that all four hinges match. If
Published 2018-01-29 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





