tubeshowcase●1,674,522 videos♡ My collection 0
← Engineering

Engineering04:06

How To Completely Lift A Car On All Four Jack Stands

Engineering Explained ↗

From the creator

How To Completely Lift Your Car Off The Ground (All Four Wheels) 2-Ton Jack (Low Profile) - http://amzn.to/2fv0zOK Subscribe for new videos every Wednesday! - https://goo.gl/VZstk7 Tools Used: 2-Ton Jack (Low Profile) - http://amzn.to/2fv0zOK Jack Stands (2 Ton) - http://amzn.to/2fS7qmi Wheel Chocks - http://amzn.to/2g7GEFQ Related Videos: Honda S2000 Playlist - https://goo.gl/FflSr1 1. To start, make sure the car is on level ground. 2. Apply the parking brake, and place wheel chocks to ensure the car doesn’t roll. Block the rear wheels when lifting the front, and block the front wheels when lifting the rear. 3. Next you’ll need to locate the jacking points; some cars will have one at the front and one in the back. If they don’t, nearly all cars will have jacking points behind each of the front wheels, and in front of each of the rear wheels. You can refer to your owners manual to locate the jacking points. 4. First we’re going to lift the front of the car onto jack stands. If you have a front jacking point, use this, if not you can use the rear jacking points, and slide a jack stand under each side of the front of the car once it’s high enough. This will require jacking both sides of the car, to get both front jack stands underneath. Place jack stands underneath each of the jacking points on the sides up front, and lower the car down onto the jack stands. Remember, you may not want to jack the car to the full desired height; I will be starting at the lowest jack sett

Published 2016-11-25 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring Engineering