tubeshowcase●1,671,250 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts06:25

How to Choose and Use a Router | Ask This Old House

This Old House ↗

From the creator

General contractor Tom Silva shares his insights on the shop's most versatile portable power tool. (See steps below.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Steps for How to Choose and Use a Router: 1. Depending on the router bit used, routers can cut a wide variety of decorative edges, profiles, and woodworking joints. 2. Straight-cutting router bits can cut dadoes, grooves, and rabbets for joining together two boards. 3. A plunge router can cut precise holes like a drill press for shelf pegs or wooden dowels. 4. Rout tongue-and-groove joints into the ends and edges of boards to create tongue-and-groove flooring. 5. Light-duty trim routers are ideal for flush-trimming plastic laminate, veneer, and other thin materials. 6. Don't use large bits in a trim router; you could burn out the motor. 7. Medium-duty fixed-based routers offer a good combination of power and speed. 8. Some routers have variable-speed motors. Use slower speeds when cutting with large-diameter bits. 9. A plunge router has a spring-loaded base that allows you to plunge the bit down into the board, and then release it to pop up out of the cut. 10. Plunge routers are useful for routing inlays, stopped grooves, and holes. 11. Router bits come in dozens of sizes and profiles. 12. Bits come with either a 1/4-inch-diameter shaft or a 1/2-inch-diameter shaft. Match the bit-shank diameter to the collet on the router. 13. Some routers come with both a 1/4-inch and a 1/2-inch collet. 14. The

Published 2016-05-07 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts