tubeshowcase●1,673,762 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts04:27

How to Change a Water Heater Anode Rod | This Old House

This Old House ↗

From the creator

This Old House plumbing and heating contractor Richard Trethewey shows a simple way to add years to your water heater, by swapping out the sacrificial metal rod that prevents rust inside the tank. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse   Time: 30 to 60 minutes Skill level: Easy. The toughest part is loosening the old anode rod. Shopping List for How to Change a Water Heater Anode Rod: - anode rod [https://amzn.to/2LnxKXa] - steel pipe [https://amzn.to/2NQtUHC], used to provide extra leverage to ratchet wrench - teflon tape [https://amzn.to/2HPb0Nt] - garden hose [https://amzn.to/2HNkFEk], used to partially drain the water heater Tools for How to Change a Water Heater Anode Rod: - screwdriver [https://amzn.to/2N3Nlxd], used to remove cover from water heater, if necessary - ratchet wrench [https://amzn.to/2LuzZqd] and 1 1/16-inch deep socket [https://amzn.to/2PMmQOJ] Steps: 1 Turn off water and fuel supply (gas or electricity) to water heater. 2 Partially drain the water heater. 3 Locate the anode rod on the water heater; if necessary, unscrew and lift off the cover from the top of the heater. 4 Use a ratchet wrench and 1 1/16-inch deep socket to unscrew the anode rod from the heater. 5 If the anode rod won't budge, slip a steel pipe onto ratchet wrench handle for extra leverage. 6 Lift out and discard the old anode rod. 7 Wrap Teflon tape around threads of new anode rod; insert anode rod into water hea

Published 2012-11-07 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts