13:51How to Build Kitchen Drawer Dividers | This Old House: Live
From the creator
Ask This Old House carpenter Nathan Gilbert demonstrates how to build custom kitchen drawer dividers as part of This Old House: Live [https://bit.ly/TOHLive]—an initiative providing daily programming and opportunities to connect with our experts during these challenging times. #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Cost: $25 Time: 4 hours Difficulty: Moderate Shopping List: ¼” poplar boards [https://www.homedepot.com/p/Weaber-1-4-in-x-4-in-x-4-ft-S4S-Poplar-Board-27404/207058971] Wood glue [https://amzn.to/3bcGOZo] Brad nails [https://amzn.to/3abbatN] Tools: Measuring tape [https://amzn.to/3eyF0fo] Miter saw [https://amzn.to/34L0f9i] Palm sander [https://amzn.to/3b9ZlWg] Table saw [https://amzn.to/2VaNf9L] Brad nailer [https://amzn.to/2Vqy6ju] Router [https://amzn.to/34BdJ7t] Shipping blanket [https://amzn.to/2VzJeKQ] Steps for Building Kitchen Drawer Dividers: 1. Measure the inside of the drawer. Each drawer varies slightly, so it’s important to get an accurate measurement of the exact drawer the dividers are going into. 2. Transfer the measurements to a piece of paper and calculate the divider layout. Nathan suggests making the dividers slightly thinner than the kitchen drawer so it can be placed in and taken out of the drawer more easily. 3. Cut the boards to length using a miter saw. Nathan suggests cutting a little bit off the tip of the board to ensure you’re starting with a square end. 4. Sand all the boards s
Published 2020-04-15 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





