35:15How to Build a Takeout Menu Holder | This Old House
From the creator
Craft a wall-mount menu holder like the one here. (See below for a shopping list, tools, and cut-list.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Ordering out at the end of a busy day can be a major time-saver. Having to rifle through a messy menu drawer, not so much. A handsome way to tackle the clutter: Craft a wall-mount menu holder like the one here. We cut plywood to size and framed it with 1x2s, then made an angled bin from a 1×4, cut into two wedges, and lauan and molding. A coat of milk paint gives it a pop of sunny color, and a rectangle of green chalkboard paint lets you customize a message—or scribble down your order. All that’s left? Just kick back and wait for the delivery guy. Shopping List for How to Build a Takeout Menu Holder: - 1/2-inch birch plywood. Get a 2-by-4-foot quarter sheet - 3/16-inch lauan. Get a 2-by-4-foot quarter sheet - 1x2 poplar board. Get a 6-foot length - 1x4 poplar board. Get a 1-foot length - 5/8-by-1 1/8-inch pine base-cap molding. Get an 8-foot length - 3/4-inch outside corner molding. Get a 1-foot length - Wood glue and superglue - Rust-Oleum chalkboard paint in Schoolhouse Green: http://www.rustoleum.com/ - Miss Mustard Seed's Milk Paint in Mustard Seed Yellow: http://missmustardseed.com/ Tools for How to Build a Takeout Menu Holder: - clamps - circular saw - miter saw - brad nailer - 1 1/4-inch brads - mini roller - small chip brush Cut list to build a takeout menu holder: ½-inch plywood back: one @ 13½
Published 2015-05-02 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





