01:54How to Build a Swing Set | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva travels to Colorado to help a couple build a DIY swing set for their young son. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 4-5 hours Cost: $1000 and up Skill Level: Moderate Tools List for Building a Swing Set: Measuring tape Speed square Drill driver Hammer Flathead screwdriver Wrench set Shopping List: DIY Play Set kit Play set kit accessories Lumber for swing set frame 4” screws Steps: 1. Measure and mark the locations of the holes for all the swing set accessories across the top beam of swing set. 2. Drill holes all the way through the beam on the marks. It’s important to keep the holes straight, so use a speed square to guide the drill bit. 3. Flip the beam over and insert the T-nuts that come with the play set kit with a hammer. 4. Insert the washers over the brackets for the swings and thread those through the holes into the T-nuts. These also come with the kit. Eventually, you won’t be able to hand tighten anymore, but you can use a screwdriver in the hole of the bracket as leverage to get it the rest of the way down. Be sure to keep the orientation of the hole perpendicular to the beam. 5. Drill the washers into the beam using the drill driver and the provided screws. 6. Assemble the A-frames of the playset using 4x4 lumber. Secure the frame together with 4” screws. 7. Once the frames are assembled, screw the provided brackets to the tops of the A-frames to hold the top beam. 8. Measure,
Published 2019-01-14 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





