02:52How to Build a Spindle Headboard | This Old House
From the creator
This Old House general contractor Tom Silva built this headboard with stock staircase parts that he cut to size and simply glued and screwed together; he even showed us a shortcut for spacing out the balusters evenly along its length. Paint or stain it any color you like and attach it to a standard steel bed frame, and you'll turn the spot where you rest your weary head into an even more welcome sight. (See below for tools and a shopping list.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Tools for How to Build a Spindle Headboard: - measuring tape - hammer - elastic tape for spacing out the balusters, (get one roll) - triangular layout square - drill/driver - miter saw - paddle bits sized to your balusters, (ours were 3/8 inch and 5/8 inch) - mallet - level or straightedge - 220-grit sandpaper Shopping list for How to Build a Spindle Headboard: - wood newel posts. Get two. - pin-top wood balusters. Get as many as you need to span the width of your headboard. Safety codes require that they be spaced no more than 4 inches apart, so do the math before you buy, and consider getting a few extra ones as insurance. (We used 14 for a queen-size headboard.) Make sure the balusters have round pins at the bottom for attaching to the bottom rail. - handrails. Get two—one for the top rail and one for the bottom rail. Pick a bottom rail that has a fillet, a thin, removable strip of wood that you'll use as a template for making holes in both rails. - brads - 6-inch
Published 2014-05-12 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





