18:55How to Build a Shaker Table | Build It | Ask This Old House
From the creator
Tom Silva and Kevin O'Connor build a historic-looking Shaker table. (See below for a shopping list, tools, and steps.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Cost: $150 for maple wood and cost of base kit Time: 5 to 6 hours Skill level: Moderate Shopping list for How to Build a Shaker Table: - 1x4 maple, for tabletop. Get four 6-footers. - Shaker candle stand base kit, for legs and table base - Piece of plywood, used for jig - Wood glue, to glue boards together for tabletop - Antique wood finish Tools for How to Build a Shaker Table: - Router, to cut tabletop - Straight bit, for router - Roundover bit, for router - Power sander, to smooth tabletop - Miter saw, to cut maple to length - Clamps, to keep wood together during drying process - Tape measure - Hammer, to create pilot hole - Power drill, to drill in screw for jig - Mallet, for assembly Steps for How to Build a Shaker Table: 1. Measure and cut seven 1x4 pieces of maple to 2-foot length. 2. Put wood glue on the side of each piece and glue them together. 3. Clamp the pieces together, put the assembly on raised blocks and wait several hours for the glue to dry. 4. Once the board assembly is dry, sand it down flat using the sander. 5. Find center of the board assembly by measuring both sides and put a small nail hole in the center. 6. The tabletop should be 22 inches around with an 11-inch radius. Make a piece of plywood into a jig by placing a screw 11 inches from a hole made by the router
Published 2015-10-19 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.
Keep exploring DIY & Crafts
18:55
02:09
LIVE
32:24✨📸 EASY K-POP DIY CRAFTS! Cute Idol Inspired School Supplies 💖
Slick Slime Sam's Maker World
55:14👑 Magical Paper Ball Night for a Princess! ❄️ DIY Crafts, Dresses & Sparkle Fun! ✂️✨
Slick Slime Sam Global
01:49
02:37