02:47DIY✨ Galaxy glitter🪩 bookmark!! #shorts #trending #craft #ytshorts #viral #diycrafts #craftideas
Twinnies Fun world
Senior technical editor Mark Powers demonstrates how to assemble a bench between two planters made from stacked cedar boards. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse There is lawn furniture, and then there is what you might call landscape furniture—custom seating built right into the terrain. Done right, it can create a little oasis in your yard or even on your deck. Take, for instance, this bench with planters for piers. Shopping List for How to Build a Planter Bench: - cedar 2_4s. Get twenty 8-foot boards to make the 16[FRACTION 12]-inch planter pieces and the 82 1/2-inch-long seat frame. - cedar 1 1/4_6s. Get four 6-foot boards to make the 63-inch-long seat, and one 8-foot board to trim the tall planter. - 3/4-inch gravel, for drainage below the planters and to fill the assembled planters. Get at least 1 1/2 cubic feet (three bags). - potting soil, to top off the planters filled with gravel. Get four 32-quart bags. - construction adhesive. Get 4 tubes. - 3-inch stainless-steel deck screws - 2-inch stainless-steel deck screws - 3-inch galvanized siding nails - 12-inch galvanized spikes Get eight Tools for How to Build a Planter Bench: - 4-foot level - miter saw - circular saw - jigsaw - Speed Square - drill/driver fitted with a 3/8-inch paddle bit - garden spade - hammer - hand tamper - caulk gun CUT LIST 2x4 planter pieces: 4 per course @ 16½ inches 2x4 seat frame front and back: 2 @ 82½ inches 2x4 s
Published 2015-01-05 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.
02:47Twinnies Fun world
01:32Daisy Arts
03:01
11:39123 GO! FOOD
10:02
03:34
01:40𝚌𝚞𝚝&𝚌𝚘𝚕𝚘𝚛 𝚋𝚢 𝚊𝚖𝚒
Allow Google Analytics to measure visits. Your history stays in your browser. Privacy details