13:51How to Build a Pergola | Ask This Old House
From the creator
In this video, bring shade and style to any backyard with a pergola kit. Here’s how to assemble it. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. House One editor Jenn Largesse continues her backyard renovation project. After installing beautiful composite decking and handrails around her shipping container pool, Jenn works with a contractor to install a vinyl pergola with aluminum reinforcement on her pool deck. Difficulty: ⅗ Time: 8 hours Cost: $1,700 to $3,000, depending on size How to Build a Pergola 1. Start by laying all of the individual parts to the pergola kit out and take inventory of what’s there. Be sure all of the parts and hardware are included. Also, if the weather was chilly overnight, allow the vinyl to warm a bit in the sun to prevent possible cracking. 2. Slide the aluminum rafters and support beams inside the PVC sleeves and use the PVC glue to attach the end caps. 3. Place the two support beams together so they’re perfectly even on the ends. Starting in the center, measure and mark the beams at 16-inch intervals and attach brackets at these points. 4. If the pergola will integrate into an existing railing, detach the railing from the existing post. Pad the existing wood post with 2x6 lumber to build it out to the width of a 6x6 (this will require trimming one 2x6 to width). 5. For new decks, plan ahead and attach extra 4x4 blocking between the joists at the locations of the posts before installing the decking. For existing decks, i
Published 2022-05-21 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





