tubeshowcase●1,673,521 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts01:58

How to Build a Log Holder | This Old House

This Old House ↗

From the creator

Senior technical editor Mark Powers shows how to build a copper pipe log cart. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Ferrying firewood to the hearth just got a lot easier with this durable cart. A sturdy plywood base rests on an open framework of copper pipes that makes loading logs a cinch. The addition of casters allows for smooth transport. It's a good way to keep smaller cuts dry and stacked in an orderly manner, and the copper is elegant enough to store hearthside even when a fire isn't blazing. Cost: About $111 Time: 3 hours Difficulty: Easy Shopping List for How to Build a Log Holder: - 3/4-inch copper pipe: Get 15 feet - 3/4-inch copper tee fittings: Get eight - 3/4-inch copper elbows: Get eight - 3/4-inch copper pipe straps: Get two - 3/4-inch plywood: Get a quarter sheet - 1/4-by-3/4-inch shelf-edge trim: Get 6 feet - 3-inch steel casters: Get four - 7/8-inch self-tapping pan-head screws - 5/8-inch multimetal or brass screws - 1/4-by-1 1/4-inch carriage bolts with nuts and washers - Wood glue - Super glue - Fast-setting polyurethane glue Tools for How to Build a Log Holder: - Tape measure - Pipe cutter - Drill/driver - 1/16-inch pilot bit - 1/4-inch drill bit - Wrench Cut list: ¾-inch copper-pipe crosspieces: four each @ 18 inches ¾-inch copper-pipe base coupling pieces: six each @ 3½ inches ¾-inch copper-pipe uprights: four each @ 14 inches ¾-inch copper-pipe top coupling pieces: four eac

Published 2015-01-14 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts