tubeshowcase●1,671,607 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts05:30

How to Build a Fire Pit from a Kit | Ask This Old House

This Old House ↗

From the creator

Ask This Old House mason Mark McCullough installs a fire pit that comes in a kit #ThisOldHouse #AskTOH SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2-3 hours Cost: $600 Skill Level: Moderate Tools: Shovel [https://amzn.to/2zi2B3X] Wheelbarrow [https://amzn.to/2ADYsHV] Tarp [https://amzn.to/2WOs0v3] Hand tamper [https://amzn.to/2TiTG9p] Level [https://amzn.to/2LGsGwm] Mallet [https://amzn.to/2TnQcT3] Caulking gun [https://amzn.to/2Xjb3b8] Shopping List: Firepit kit [https://amzn.to/3dVQ3y2] Crushed stone [https://thd.co/2zfsfXa] Stone dust [https://thd.co/3g9AV1J] Construction adhesive [https://amzn.to/3cQ8KmH] Steps for building a fire pit from a kit: 1. Determine a good location for a fire pit. Be sure there are no trees overhead or any other structures that could catch fire from floating embers. 2. Use the center ring of the kit and the first course of blocks to determine how wide the hole needs to be. 3. Cut a circle a few inches around the outside of the course of blocks with the shovel. Using the shovel, pull up the top layer of grass and set it aside on a tarp so it can be reused to backfill the hole later. 4. Once the outside circle is outlined, remove the center ring and the course of blocks and dig a hole about 8” deep. 5. Compact the ground using a hand tamper until the base is perfectly solid. 6. Pour a layer of crushed stone into the hole. Compact it using the hand tamper. 7. Repeat this process with the crushed stone unti

Published 2020-05-24 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts