tubeshowcase●1,673,749 videos♡ My collection 0
← DIY & Crafts

DIY & Crafts05:22

How to Build a Decorative Driveway Marker | This Old House

This Old House ↗

From the creator

A well-proportioned driveway marker lends a bit of white-picket pizzazz that will help any house stand out among its peers. This design by This Old House contributor Christopher Beidel, owner of Pernt, a handmade-furniture company, in Brooklyn, New York, has the added benefit of being relatively easy to build. Nearly all the cuts can be made with a miter saw and a circular saw. And pressure-treated lumber makes the project sturdy and capable of standing up to the elements for many years. Follow along as Christopher pieces it together. (See below for a shopping list and tools.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Shopping List for How to Build a Decorative Driveway Marker: - 1x3 for the balusters Get four 6-footers. - 6x6 post Get one at least 3 feet long. - 4x4 post Get one at least 3 feet long. - 1x4 for the rails Get two 8-footers.1_-inch deck screws - _-inch threaded galvanized-steel rod - primer and paint Tools for How to Build a Decorative Driveway Marker: - miter Saw - combination square - straightedge - rafter square - clamps - circular saw - handsaw - drill/driver - _-inch Spade Bit - hammer - chisel - mallet - paintbrush CUT LIST Center Post: Pressure-treated or cedar 6x6: one @ 28 inches End Posts: Pressure-treated or cedar 4x4: two @ 16 inches Bottom Rails: Pressure-treated or cedar 1x4: one @ 37 3/4 inches; one @ 37 inches to butt into the first rail Top Rails: Pressure-treated or cedar 1x4: two @ 48 inches. Cut an 8-footer in hal

Published 2014-10-27 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.

Keep exploring DIY & Crafts