18:08How to Build a Custom Fence Gate | Ask This Old House
From the creator
In this video, Ask This Old House carpenter Nathan Gilbert helps a homeowner build a custom fence gate to keep his kids safely in the backyard. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse. Nathan Gilbert helps a homeowner install a custom fence gate. The house is home to two young children and the parents are worried they might run into the street. While the homeowners could buy a gate from a home center, the backyard has a wood fence with horizontal paneling. So, Nathan creates a custom wood gate with horizontal paneling to match the rest of the fence. To secure the post he uses a special two component, expanding foam. Nathan joins Kevin in the workshop to talk more about the special post mix. Time: 4 hours Cost: $400 Skill Level: Moderate Tools: Level [https://amzn.to/2RJUGoY] Drill [https://amzn.to/3niPYul] Post hole digger [https://amzn.to/3vaQRb4] Brad nailer [https://amzn.to/3dF3yVD] Tape measure [https://amzn.to/3elTmjH] Compound miter saw [https://amzn.to/3tE3ESF] Shopping List: Stock pressure treated lumber [https://thd.co/2QJKCvI] String [https://amzn.to/3gsgznh] Expanding foam fence post mix [https://amzn.to/3vdkJU9] Gate lock [https://amzn.to/3grhBjl] Hinges [https://amzn.to/3tHZXvA] Steps: 1. Mount two 2x4” boards on either side of where the gate is going. 2. Dig about 2 feet down for each of the two posts. About a third of the post will fit in the hole. 3. Use a string line going from one 2x4” to the other. This will be used to cut
Published 2021-04-25 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





