35:15How to Build a Bottle-Vase Holder | This Old House
From the creator
Presenting flowers may be somewhat predictable, but not when they come in this tabletop display piece. All it takes is a simple framework made from stock oak and molding. Pluck the "vases" from the recycling bin or buy new ones with a shape you like. Ours look like scaled-down milk bottles, bringing a touch of old-timey character to the table. (See below for a shopping list, tools, and a cut list.) SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Shopping List for How to Build a Bottle-Vase Holder: - 1x4 oak. Get a 3-foot length for the top and the base. - Oak base molding or plinth blocks. Get a 1-foot length in a profile that matches the height of your bottles. - 1/2-by-3/4-inch oak shoe molding"] Get a 6-foot length. - Decorative glass bottles. Get three. - 1 1/2-inch wood screws - Superglue - Wood glue - Medium- and fine-grit sandpaper - Stain - Paste wax Tools for How to Build a Bottle-Vase Holder: - Combination square - Drill/driver - Combination countersink bit - Hole saw (sized for the bottle openings) - Wood rasp - Wood file - Miter saw - 24-inch bar clamp - Lint-free cloth Cut list: - 1x4 oak top: Cut to fit. (Ours measures 11 1/2 inches.) - 1x4 oak base: Cut to fit, 1 1/2 inches longer than the top. (Ours measures 13 inches.) - Oak base molding or plinth blocks: two @ 3 1/2 inches. Select a profile that matches the height of your bottles. - 1/2-by-3/4-inch oak shoe molding: Mitered to fit Or download the cutlist here: http://img2.timeinc.net/
Published 2014-12-19 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





