35:15How to Apply Rafter Tails | Pro2Pro | This Old House
From the creator
How do you apply rafter tails to the exterior of a structure after the walls have been sheathed? Home builder Jeff Sweenor developed a simple solution that's efficient to execute. #ThisOldHouse #AskTOH #Pro2Pro SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse During a recent trip to our Westerly project, Kevin O’Connor caught up with builder Jeff Sweenor to discuss the rafter tail detail and how Sweenor ultimately decided to approach the build. The drawings for this Dutch Colonial call for a series of applied tails on several areas of the exterior, including along the sidewalls where the gambrel roof sits. This section of the house called for 62 rafter tails, which are spec’d to be installed along the exterior to create an eave detail. The drawings specify a continuous 2x6 cleat to hold 62 rafter tails that are 14” wide and include a soft slope. Note in the drawing (at min. 1:02) that the tails were milled so that when installed onto the 2x6 cleat, the bottom edge of the cleat aligns with the bottom of the rafter tails. This provides continuous nailing surface at the back of the soffit. Also worth noting is the beveled 2x6 ledger at the top which provides continuous nailing for the double layers of 3/8” plywood. Finally, a beveled 2x sub fascia provides nailing for the fascia and ties the front of the rafter tails together. Sweenor says that to have these built on-site would have taken one of his carpenters two full days using a jigsaw and circular saw bec
Published 2019-06-11 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





