01:54Home Message Center | Build It | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva and host Kevin O’Connor use stock lumber and millwork from a home center to build a home message center that mimics a window. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Tom and Kevin use stock lumber and millwork from a home center to build a home message center that mimics a window. Time: 3-4 hours Cost: $100 Skill Level: Moderate Tools List: Drill/Driver Miter Saw Headless Nail Gun Router with a Roundover Bit Track Saw Shopping List: 1x3 Poplar 1x4 Poplar 1x6 Poplar Colonial Casing Crown Molding 3” screws Wood Glue Headless Nails Steps: 1. Cut 1x3 poplar to desired length and build a three-sided frame. Use a butt joint, predrilling the hole first, and then fastening with a 3” screw. 2. Cut Colonial Casing to length, mitering the top corners of each piece at 45 degrees. 3. Glue and nail the casing to the frame, leaving a _” reveal around the inside. 4. Glue and nail the miters together on the casing. 5. Cut 1x4 poplar to desired length and build another three-sided frame with butt joints and 3” screws. This frame will be taller than the inner frame as it will be the mounting point for the crown molding. 6. Glue and nail the outside of the casing to the outer frame. 7. Glue and nail a piece of 1x4 as a flat stock above the top piece of casing. Use a filler block to ensure it doesn’t warp. 8. Mark and cut the miters for the crown molding. 9. Glue and nail the crown molding to the message center asse
Published 2017-04-23 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





