02:33Hand Carved Utensils | Build It | Ask This Old House
From the creator
Ask This Old House general contractor Tom Silva and host Kevin O’Connor hand carve wooden serving utensils using leftover pine from a previous Build It project. SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse Time: 2-3 hours Cost: $50 Skill Level: Beginner Tools List for Building Wooden Utensils: Pencil [https://amzn.to/2WZ6p00] Scissors [https://amzn.to/2J460Ex] Japanese pull saw [https://amzn.to/2X4CUi5] Coping saw [https://amzn.to/2WXBilm] Rasp [https://amzn.to/2XvUbjO] Spoke shave [https://amzn.to/2Xzg15O] Curved gouge [https://amzn.to/2XuwlF3] Rags [https://amzn.to/2RA3ae4] Shopping List: Paper [https://amzn.to/2Yef3sP] Wood [https://amzn.to/2FvBzWU] Sandpaper [https://amzn.to/2RApd4y] Tack cloth [https://amzn.to/2Nf7cKv] Food grade wood conditioner [https://amzn.to/2NbSpQQ] Steps: 1. Trace out an outline of the utensils on a piece of paper and cut it out to use as a template on the wood. 2. Place the paper template on the scrap wood being used for the utensils. Trace the outline over a decent section of the wood with straight grain and no knots. 3. Cut the scrap wood into a workable piece using the cross-cutting side of a Japanese pull saw. 4. While still using the Japanese pull saw, make relief cuts along the outline of the utensils. This will make the wood easier to cut later on. 5. Make a rough thickness cut using the Japanese pull saw so that the utensils are roughly the desired depth. This can be fine-tuned later. 6. Use the coping saw
Published 2019-06-30 · Watch on YouTube ↗
Availability and playback restrictions are controlled by the original channel.





